Designed by Acerbis, the X-Ultimate Handguards are an open hand guard with nylon bracelets preferred by the Zero Motorcycles race team for use with the X Line motorcycles. The upper and lower lids are removable for maximum ventilation. Available in white or black. FOR OFF-ROAD USE ONLY – NOT APPROVED FOR USE ON PUBLIC ROADS This accessory is designed and intended exclusively for off-road or closed-course competition use. It is not approved for use on public roads and may lead to the loss of your vehicle’s roadworthiness approval and insurance coverage. Please ensure compliance with local laws and regulations before installation or use.

X-Ultimate Handguards by Acerbis, White

X-Ultimate Handguards by Acerbis, Black

Raise your seat height by approximately one inch from the standard height of 31 inches. The UV stable seat skin minimizes deformation over time and is resistant to temperature changes, while the smooth and patterned surfaces offer a balance between grip and movement.

Street High Seat

Lower your seat height by approximately one inch from the standard height of 31 inches. The UV stable seat skin minimizes deformation over time and is resistant to temperature changes, while the smooth and patterned surfaces offer a balance between grip and movement.

Street Low Seat

The Touring Seat was designed by Zero Motorcycles for riders who enjoy taking the long way. Dual-layer foam offers increased comfort and performance for both rider and pillion. The subtle design details and double-stitched fabric give this seat a premium aesthetic at an affordable price. The Touring Seat installs easily and is a direct replacement for the original seat.

Touring Seat Assembly

Available Spring 2025Black powder coated steel with rugged construction, this center stand provides extra stability for parking a loaded Zero. It also offers additional ground clearance to ease maintenance and enhances tire protection when parked for long periods of time.

Center Stand

Available Spring 2025 Black powder coated steel with rugged construction, this center stand provides extra stability for parking a loaded Zero. It also offers additional ground clearance to ease maintenance and enhances tire protection when parked for long periods of time.

The Smoked Windscreen allows you to customize your bike with a sleek, dark smoke-tinted version of the standard windscreen and attaches easily to the motorcycle's existing screen mounting points.

Smoked Windscreen

The Commuter Screen provides maximum wind deflection, adding further practicality to your Zero. In partnership with MRA, a leading motorcycle screen manufacturer, Zero designed the Commuter Screen to last. The Commuter Screen comes with all the needed parts for installation and mounts easily onto the handlebar risers.

Commuter Screen Kit

Built for the long-haul, the Touring Windscreen offers the highest degree of wind and weather deflection, further enhancing rider comfort. This screen is designed for fatigue-free traveling on long trips and attaches to the same mounting location as the OEM windscreen.

Touring Windscreen Assembly

Built for the long-haul, the Windscreen assembly offers greater wind protection for relaxed, fatigue-free long trips. Less turbulence around the helmet and neck area increases rider comfort. This screen is designed to mount to the same mounting location as the OEM windscreen.

Sport Windscreen Assembly

Get maximum wind and weather deflection while adding further practicality and riding comfort to your SR/S. Designed in partnership with leading motorcycle screen manufacturer, MRA, the touring windscreen comes with all required components for installation and mounts easily to the motorcycle's existing screen mounting points.

Touring Windscreen

Built for the long-haul, the Touring Windscreen offers our highest degree of wind and weather deflection, further enhancing rider comfort and improving aerodynamics. This screen is designed to mount to the same location as the OEM windscreen and remains fully adjustable.

Touring Windscreen (DSR/X)

Zero Tank Grips were developed in cooperation with TechSpec. Made from their premium 0.124 inch thick Snake Skin material and a low profile diamond pattern, the tank grips feature TechSpec's proprietary releasable adhesive. These properties provide unparalleled grip and increased control while improving rider comfort by decreasing pressure on wrists, elbows and shoulders.

Zero Motorcycles Tank Grips by TechSpec

Zero Tank Grips were developed in cooperation with TechSpec. Made from their premium 0.124 inches (0.32 cm) thick Snake Skin material and a low profile diamond pattern, the tank grips feature TechSpec's proprietary releasable adhesive. These properties provide unparalleled grip and increased control while improving rider comfort by decreasing pressure on wrists, elbows, and shoulders.

Zero Motorcycles Tank Grips by Techspec

Protect your hands from trees, brush, and rocks with the Zero Hand Guards. Designed by Cycra Racing, the black anodized bars and handlebar clamps integrate neatly onto your motorcycle’s handlebars. In the event of a crash, the handguards serve to protect your brake lever as well as other handlebar controls. Included with this handguard kit are black or white, high impact plastic hand shields and hardware required for installation.

Zero Motorcycles Handguards by Cycra

Crank up the heat with Zero’s Heated Grips Upgrade Kit. Both grips plug into the existing harnesses and draw power directly from the power distribution unit. They are fully integrated, controlled by the existing switchgear and dash functionality. The right-side grip is co-molded with the throttle to eliminate any chance of slippage.

Heated Grips Upgrade Kit

If you’re an all-weather rider, the Rain Guard is a great addition to your Zero motorcycle. This durable plastic rear fender limits spray and splatter from the rear tire while increasing comfort and cleanliness in inclement conditions. The Rain Guard comes with all parts required for installation. Note: the Rain Guard is not compatible with FX or FXS models.

Rain Guard Kit

Comfort

Personalize and upgrade your Zero by replacing the OE front, painted fender with a carbon fiber fender to add contrast and a sportier look. It’s extremely light and made from the highest quality material and workmanship. You can never have too much carbon fiber in your quest to make a statement and increase the performance of your ride.

Carbon Fiber Front Fender (Quickstrike)

Personalize and upgrade your Zero by replacing the OE rear inner, painted fender with a carbon fiber fender to add contrast and a sportier look. It’s extremely light and made from the highest quality material and workmanship. You can never have too much carbon fiber in your quest to make a statement and increase the performance of your ride.

Carbon Fiber Rear Inner Fender (Quickstrike)

It’s the little things that can add up to major aesthetic upgrades. Carefully crafted from anodized aluminum from Barracuda, these Quickstrike B-Lux Mirrors add a premium aesthetic to your bike. As the saying goes, the devil is in the details. Sold in pairs.

B-Lux Mirrors (Quickstrike)

Our PowerParts levers add a visual highlight while providing technical and ergonomic value. - CNC-machined from high-strength aluminum- Tough, black anodized surface finish- Lever folds away upwards in the event of a crash- Adjustable grip width- Adjustable lever length

Brake lever (Quickstrike)

Don’t leave yourself open to vulnerabilities and the need to spend money on replacement parts. Protect your lever from unintentional ground contact or operation from other riders. The anodized, CNC-milled billet aluminum provides an elegant, racing aesthetic. Compatible with all of Zero’s standard 7/8” handlebars.

B-Lux Lever Protector (Quickstrike)

It’s the little things that can add up to major aesthetic upgrades. Carefully crafted from anodized aluminum by Barracuda, these B-Lux bar ends add a little extra flare. As the saying goes, the devil is in the details. Sold in pairs and compatible with all Zero OE bars.

B-Lux Bar Ends (Quickstrike)

Designed to enhance the front-end aesthetic of the Zero SR/F, the Aluminum Fly Screen provides a premium and aggressive aesthetic with optimized aerodynamics. Engineered to mount easily in front of the dash using the existing Fly Screen mounting hardware. Additional DASH COVER FLYSCREEN for 2020 SR/F required. PN: 24-08600. Price: $23.08.

Aluminum Fly Screen (Quickstrike)

Give yourself some extra peace of mind, protect your ride from accidental damage, and save yourself from unexpected repair costs in the future. These premium, high-strength spools will safely secure your bike onto a rear bike stand.

Swingarm Spools (Quickstrike)

It’s the little things that can add up to major aesthetic upgrades. Adding this anodized, billet aluminum front reservoir cap is a great way to upgrade the look of your Zero with a premium touch. As the saying goes, the devil is in the details.

Front Reservoir Cap (Quickstrike)

It’s the little things that can add up to major aesthetic upgrades. Adding this anodized, billet aluminum rear reservoir cap is a great way to upgrade the look of your Zero with a premium touch. As the saying goes, the devil is in the details.

Rear Reservoir Cap (Quickstrike)

Designed to enhance the front-end aesthetic of the Zero SR/F, the Fly Screen is constructed with high-quality engineering-grade thermoplastic. Engineered to mount easily in front of the dash using the existing Fly Screen mounting hardware.

SR/F Fly Screen

The Headlight Grill was designed to add protection and style for off-road riders. After installation, the Headlight Grill will provide protection from trail hazards, roost, and flying debris, reducing the chance of damage to the factory headlight. The Headlight Grill is manufactured using powder coated steel and comes with required mounting hardware. A must-have for serious off-road riders. Note: not homologated for street use; for off-road use only.

Headlight Grill

Designed by Pro Taper, our aggressive footpegs increase the rugged profile of your DS, DSR, FX or FXS. They offer hard anodized billet aluminum cleats, a stainless steel platform base, and the exclusive Pro Taper traction arch cleat design.

Aggressive Footpegs Kit

Designed by Puig, these footpegs increase the rugged profile of your DS, DSR, DSR/X, FX, or FXS. Made of black anodized aluminum for strength and stainless steel dropouts for maximum grip. Sold in pairs.

Puig Off-Road Accessory Peg Kit

Ride longer with added comfort while keeping the stock look. The Rider Comfort Footpeg Kit enhances rider ergonomics by lowering the footpegs 20mm from the stock position.

Rider Comfort Footpeg Kit

Ride with a more aggressive positioning with a stock look while enhancing ride ergonomics by raising the rider footpegs 20mm from the stock position.

Rider Performance Footpeg Kit

The Zero Frame Protection Bar Kit was designed to meet the demands of our police and military customers. Manufactured using black powder coated steel, they provide the Zero FX, FXS, and FXE with extra protection from damage caused during tip over events.

Frame Protection Bar Kit

The Dual Sport Drop Bars were designed by Zero Motorcycles to meet the demands of our police and military riders. Manufactured using black powder-coated steel, they provide the DS and DSR with extra protection from damage caused during tip over events. The drop bars include a metal skid plate.

Frame Protection Bar Accessories Kit

DSR/X frame guards offer reliable protection for critical components. Constructed from rugged steel tubing, they are then powder-coated to prevent corrosion. Their model-specific design ensures a precise fit, and maximum lean angle clearance.

Frame Guards

There's no better way to protect the bottom of your frame and battery than the DSR/X Skid Plate. Made from 5052-H32 aluminum, this Skid Plate is built to shield your bike from the constant abuse that occurs while riding off-road.

Skid Plate

For those who prefer the blacked-out look, you can add this high-quality, blacked out, powder coated brake pedal to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Brake Pedal

For those who prefer the blacked-out look, you can add these high-quality, blacked out, powder coated passenger mounts to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Passenger Mounts

For those who prefer the blacked-out look, you can add these high-quality, blacked out, powder coated grab bars to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Grab bars

Black Grab Bars (SR/S)

For those who prefer the blacked-out look, you can add these high-quality, blacked out, powder coated headlight wings to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Headlight Wing Set

For those who prefer the blacked-out look, you can add this high-quality, blacked out, powder coated lower body panel set to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Lower Body Panel Set

For those who prefer the blacked-out look, you can black out the panels just below your tank with these high-quality, powder coated body panels. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Tank Arm Lower Outer Set

For those who prefer the blacked-out look, you can add these high-quality, blacked out, powder coated rear sets to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Rear Sets

For those who prefer the blacked-out look, you can add these high-quality, blacked-out, powder-coated rear sets to your bike. We also offer an array of other blacked-out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Rider Rear Sets

The Aluminum Bar Ends are made from 6061 aluminum and are available in silver and in black. They are compatible with all of Zero’s standard 7/8” handlebars.

Aluminum Bar Ends

For those who prefer the murdered-out look, you can add this high-quality, blacked out, powder coated dust cover set to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Dust Cover Set

For those who prefer the blacked-out look, you can add this high-quality, blacked out, powder coated dust cover set to your bike. We also offer an array of other blacked out components that give you the ability to completely overhaul your bike’s aesthetic to meet your personal taste.

Black Dust Cover Set (DSR/X)

Ready to step up your adventure touring game and get deeper into nature? Upgrade your bike’s appearance and ability to take on the harshest of off-road conditions. These high-quality, wire spoke wheels will transform your Zero into a more rugged and durable off-roading machine.

Wire Wheel Front

Wire Wheel Rear

Wire Wheels

These LED turn signals provide increased brightness and visibility, without straying too far from the OEM look.Features: 6 ultra-bright LED lights per signal Soft stem design M8 threading Sold as a set of 2 For S, SR (2014-2021), DS, DSR, FX, FXE, FXS: LED Flasher Unit PN 45-08281 is required.

LED turn Signal Set

These LED turn signals provide increased brightness and visibility, without straying too far from the OEM look.Features: 6 ultra-bright LED lights per signal Soft stem design M8 threading Sold as a set of 4

When you must ride in harsh weather conditions, every little safety advantage counts. Gain extra visibility when traversing through the fog or rain with low visibility. These Fog Lights are designed to mount neatly on the underside of the front fairing.

Fog Lights

Make your motorcycle look brand new and make room for new charging or battery accessories with an assortment of bodywork options.

S Bodywork

SR Bodywork

DS Bodywork

DSR Bodywork

Customize your bike with fresh and clean new bodywork starting with the tank.

FX Color Options

FXS Color Options

The Sticker Set was designed by Zero Motorcycles for enthusiastic FX and FXS riders. Exclusively created for the FX and FXS models using high-performing materials. The used crystall is 0.5mm thick and is combined with a strong and long-lasting adhesive, specifically designed for off-road use. Silk-screen printing realized with resistant and shiny inks. A nice upgrade for those who like to stand out from the crowd. To obtain the best result, the sticker must always be pre-heated using a heat-gun. Clean the surface with a dry rag or use a special degreaser. Do not use any soaps or detergents. These stickers can be modified for use with modular batteries.

Blackbird Racing Sticker Set

Design

Need to extend your fun on the Zero XE? Keep a spare battery charged and ready to go. The 4.3kWh (74V 58Ah) lithium-ion power pack can be charged on the bike or easily removed in under a minute for convenient charging anywhere. This battery charges from 0-95% in just 5 hours with the 800W charger and a standard 110V outlet.

LI4.3 Battery

Keep a fully charged spare battery on hand and swap it in less than a minute to keep chasing adventure on your Zero XB. The 2.4kWh (74V 32Ah) lithium-ion power pack can be charged directly from the bike or removed for easy charging anywhere. With the 800W charger, it charges from 0 to 95% in just 2.5 hours using a standard 110V outlet.

LI2.4 Battery

Cut your charge time nearly in half. The 1500W off-board charger easily plugs into any standard 220V household outlet and charges the 2.4kWh battery from 0-95% in 1.6 hours and the 4.3kWh battery in 2.5 hours. Conveniently charge directly from the bike or easily remove the battery from the bike to charge wherever is most convenient.

Off-board 1500W Charger

Cut your charge time nearly in half. The 1500W off-board charger charges the 2.4kWh battery from 0-95% in 1.6 hours and the 4.3kWh battery in 2.5 hours. Conveniently charge directly from the bike or easily remove the battery from the bike to charge wherever is most convenient. This charger requires a 20 amp circuit with a NEMA 6-20p receptacle.

Charge faster. The 1200W off-board charger easily plugs into any standard household outlet and charges the 2.4kWh battery from 0-95% in 1.9 hours and the 4.3kWh battery in 3.25 hours. Conveniently charge directly from the bike or easily remove the battery from the bike to charge wherever is most convenient.

Off-board 1200W Charger

The 800W off-board charger easily plugs into any standard NA household outlet and charges the 2.4kWh battery from 0-95% in 2.5 hours and the 4.3kWh battery in 5 hours. Conveniently charge directly from the bike or easily remove the battery from the bike to charge wherever is most convenient.

Off-board 800W Charger

The Tesla Tap Mini is a compact, versatile charging adapter designed to unlock access to an additional 40,000 Tesla Destination Chargers, UMCs, and Wall Connectors in North America. This accessory is not compatible with the Tesla Supercharger network but opens the door to thousands of additional charging points, significantly enhancing the charging infrastructure available to Zero riders. Key Features of the Tesla Tap Mini: • Universal Compatibility: Seamlessly works with all Level 2 Destination Tesla chargers (excluding Superchargers), offering Zero owners unparalleled access to a broad charging network. • Safe & Secure: Equipped with circuitry to maintain full functionality and adhere to safety protocols. Features two padlock slots for securing the adapter to your Tesla connector and your Zero Motorcycle. • Wide Range Charging: Capable of charging from any stationary or portable EVSE ranging from 110V to 250V with a NACS charging pistol, providing flexibility for riders on the go. • US-Built EV Friendly: Designed to be compatible with any US electric vehicle and charges at up to 60 AMPS @ 250VAC (15 kW), making it a versatile addition to any electric vehicle enthusiast's toolkit. The Tesla Tap Mini is compatible with all Zero models featuring a J-1772 charging inlet. This includes 2015 and newer S, SR, DS, and DSR models equipped with a Charge Tank.

Tesla Tap Mini

Gain an additional 3.6 kWh of battery capacity while still retaining a small lockable storage area. Zero's Power Tank extends your motorcycle's range by installing an extra power pack in place of the tank storage compartment. Because both accessories occupy the tank storage compartment area, the Power Tank is not compatible with motorcycles equipped with the 6kW Rapid Charger. Note: this is a dealer-installed accessory.

Power Tank

Gain an additional 3.6 kWh of battery capacity while still retaining a small lockable storage area with this dealer-installed accessory. Zero’s Power Tank extends your motorcycle’s range with an extra power pack in place of the tank storage compartment. The Power Tank is not compatible with motorcycles equipped with the 6kW Rapid Charger.

Power Tank Adventure

Power Tank (2020-2021)

Charge 2-3x faster with this dealer-installed accessory. Zero's Premium Rapid Charger adds 6kW of charging power to your motorcycle, significantly reducing time to recharge to about 1-2 hours. Because the additional Charger is installed in place of the tank storage compartment, the Rapid Charger is not compatible with motorcycles equipped with the Power Tank accessory.

6kW Rapid Charger

Charge 2-3x faster with this dealer-installed accessory. Zero’s Rapid Charger adds 6kW of charging power to your motorcycle, significantly reducing time to recharge to about 1-2 hours. The Rapid Charger is not compatible with motorcycles equipped with the Power Tank accessory.

6kW Rapid Charger Adventure

6kW Rapid Charger (2020-2021)

Charge 2x faster with this dealer-installed accessory. Zero's Standard Rapid Charger adds 3kW of charging power to your motorcycle, enabling a 6kW Rapid Charging System as equipped and significantly reducing time to recharge to about 2.5 hours.

Standard 3kW Rapid Charger

Gain an additional 3.6 kWh of battery capacity with this dealer-installed accessory. Zero's Power Tank extends your motorcycle's range by installing an extra power pack in place of the tank storage compartment. Because both accessories occupy the tank storage compartment area, the Power Tank is not compatible with motorcycles equipped with the 6kW Charge Tank. * Manufactured to order and requires extra processing time

Z-Force® 3.6 Power Tank (S)

Charge 6x faster using the 6kW Charge Tank combined with Level 2 charging stations. This dealer-installed accessory complements the standard on-board charger of 2015-2023 Zero motorcycles, reducing typical charge times to 1-2 hours. Because the additional Charger is installed in place of the tank storage compartment, the Charge Tank is not compatible with motorcycles equipped with the Power Tank accessory. Painted Charge Tank bodywork does not match 2015-2016 model colors. Matching painted body parts are available to fully renew the look of your motorcycle. * Manufactured to order and requires extra processing time.

6kW Charge Tank (S)

Z-Force® 3.6 Power Tank (SR)

6kW Charge Tank (SR)

Gain an additional 3.6 kWh of battery capacity with this dealer-installed accessory. Zero's Power Tank extends your motorcycle's range by installing an extra power pack in place of the tank storage compartment. Because both accessories occupy the tank storage compartment area, the Power Tank is not compatible with motorcycles equipped with the 6kW Charge Tank.

Z-Force® 3.6 Power Tank (DS)

6kW Charge Tank (DS)

Gain an additional 3.6 kWh of battery capacity with this dealer-installed accessory. Zero's Power Tank extends your motorcycle's range by installing an extra power pack in place of the tank storage compartment. Because both accessories occupy the tank storage compartment area, the Power Tank is not compatible with motorcycles equipped with the 6kW Charge Tank. * Manufactured to order and requires extra processing time.

Z-Force® 3.6 Power Tank (DSR)

6kW Charge Tank (DSR)

Z-Force® power pack technology has been revolutionizing the electric motorcycle industry since 2007 when the first Zeros started rolling out of the Santa Cruz factory. The goal: pack more energy into less space. Using state-of-the-art lithium-ion cell chemistry and advanced battery management systems, the Z-Force® 3.6 Power Pack Module offers incredible power density and versatility. Zero Motorcycles is the first electric motorcycle manufacturer to feature available hot-swappable modules. This optional system allows the Zero FX and FXS to be ridden using either one or two Z-Force® 3.6 modules. Modules can be moved between compatible motorcycles quickly, without concern regarding the state-of-charge or relative age of the accompanying module.

Z-Force® 3.6 Power Pack Module

Motorcycle Quick Charging One Quick Charger provides an additional 1 kW of charging capability. When used with your motorcycle’s integrated charging system, this approximately doubles the amount of energy flowing to the power pack during charging. As a result, charge time is reduced by about 50%. To charge even faster, multiple Quick Chargers can be purchased and used with a Quick Charger Y Adapter to reduce the charge time further. Off-Board Power Pack Charging The Quick Charger can be used to charge power pack modules when removed from the motorcycle. Specifically the Z-Force® 3.3 or Z-Force® 3.6 Power Pack Modules, used with the Zero FX, Zero FXS and Zero XU motorcycles, require the Power Pack Module Charging Adapter when the power packs are charged off-board. The North American Quick Charger kit, the Quick Charger (96 Volt) UK and Hong Kong kits include a cord approved for use in their respective countries.

Quick Charger

Motorcycle Quick Charging One Quick Charger provides an additional 1 kW of charging capability. When used with your motorcycle’s integrated charging system, this approximately doubles the amount of energy flowing to the power pack during charging. As a result, charge time is reduced by about 50%. To charge even faster, multiple Quick Chargers can be purchased and used with a Quick Charger Y Adapter to reduce the charge time further.

The Power Pack Module Charging Adapter is required to charge your Z-Force® 3.3 or Z-Force® 3.6 Power Pack Modules when removed from your motorcycle. The adapter is used in conjunction with a Quick Charger. Note: For FX bikes only, please note that the adapters are not compatible between model year 2013 and model year 2014-2023 Zero Motorcycles.

Off-Bike Module Charging Adapter Kit

The SAE J1772 Charging Adapter allows you to charge your Zero using applicable public electric vehicle charging stations. The charging adapter plugs directly into the standard charging port of applicable models and does not require any installation or modification of your motorcycle. Please note, the SAE J1772 Charging Adapter will not speed up your motorcycle charge time, which is limited by the motorcycle’s integrated charger. Also, some public J1772 charging stations require the vehicle to authenticate itself. The SAE J1772 Charging Adapter does not support charging stations that require such authentication.

J1772 Charging Adapter

The Quick Charger Y Adapter allows you to charge your motorcycle with multiple Quick Chargers to significantly reduce charge times. The single plug side of the adapter inserts into the charging port on the motorcycle (or power pack) and the double side of the adapter plugs into the outputs of two separate Quick Chargers. This adapter was designed specifically for use with 2016-2023 Zero motorcycles.

Delta Q Y Charging Adapter Kit

Charge a GPS, smartphone, or media player using the Zero Motorcycles 12V Accessory Socket Kit. Designed to connect directly to your motorcycle’s power port harness, the accessory socket enables you to charge small devices that have a cigarette lighter plug. The accessory outlet is rated up to 10 amps/120 watts. This kit includes the necessary bracket and mounting hardware for installation.

12V Accessory Socket Kit

Zero models ranging from 2013 to present each have a single Sumitomo accessory power port. The 12V W Accessory Adapter Kit is required to install multiple power accessories such as the Heated Grips, Heated Seat, and the 12V Accessory Socket Kit.

12V W Accessory Adapter Kit

This premium quality EVSE CABLE, TYPE 2 TO TYPE 2 allows your Zero SR, SR/F, SR/S or DSR/X to charge up to 12kW when equipped with Zero's Rapid Charger. The cable is also lighter and shorter than the standards making it easier to carry in the luggage compartment of your motorcycle. Made in Germany.

EVSE Cable Type 2 to Type 2

Charge up to 3kW without the need for an EV charging station. This premium quality EVSE CABLE, TYPE 1 allows you to plug your Zero S, SR, DS, and DSR directly into a wall outlet when equipped with Zero's Charge Tank. The cable includes 4 levels of charging, an RCD safety switch, and an automatic temperature sensor that cuts out when overheating. Made in Germany. * Image for reference only.

Wall Outlet Adapter Type 1

Charge up to 3kW without the need of an EV charging station. This premium quality EVSE CABLE, TYPE 2 allows you to plug your Zero SR, SR/F, SR/S or DSR/X directly to a wall outlet. The cable includes 4 levels of charging, RCD safety switch and an automatic temperature sensor that cuts out when overheating. Made in Germany. * Image for reference only.

Wall Outlet Adapter Type 2

Power

The Zero Street Backpack is designed by Zero riders for Zero riders. The Street Backpack offers three compartments: a specially designed cable compartment, for Zero EVSE Cables, with a padded foam back panel and PE plate for added comfort and safety, a main and laptop compartment, and an accessories compartment. The backpack has a EVA hardshell with nubuck finish, reflective piping on the front and straps for extra visibility at night, padded straps, handle and large side flaps for comfort, anti-slip bottom, nylon webbings, neoprene tension lock cover and additional rain cover for the rainy days.

Street Backpack

The Zero Motorcycles MX Jersey is designed to celebrate the all-new Zero XB and Zero XE motorcycles. This high-performance long-sleeve jersey blends style and function, featuring a bold red checkered sleeve for a race-inspired look. Crafted from lightweight, moisture-wicking fabric, it offers superior breathability and comfort for intense rides. Whether you're hitting the trails or repping Zero Motorcycles off the bike, this jersey delivers the perfect mix of performance and electric-powered adrenaline.

MX Jersey Long Sleeve

Meet the Hydra Touring H2O Jacket, designed and produced in partnership with REV’IT!. This active-fit adventure touring garment is fashioned with a progressive design and a hard-shell construction made from a flexible, waterproof stretch ripstop fabric, along with CORDURA® ripstop at the shoulders and arms for increased abrasion resistance. Open-structured SEESMART CE-level 1 impact protection at shoulders and elbows provides the necessary armor while ventilation zippers at the lower and upper arms keep riders cool. For added style as well as practicality, the hood/storm collar combination keeps the rider dry off the bike and can be stored in the lower-back pocket when you’re not using it.

Hydra Touring H2O Jacket

Meet the Hydra Touring H2O Pants, designed and produced in partnership with REV’IT!. Made of rugged CORDURA® ripstop fabric laminated with a waterproof hydratex membrane, the Hydra Touring H2O pants are ready to take on adventure touring whenever you are. PWR|Shell ripstop stretch is used on the inside of the legs and upper knees for maximum flexibility and comfort. A removable thermal liner will keep the rider comfortable and warm in lower temperatures and protection is provided by SEESMART CE-level 1 protectors at the hips and knees. To get the right fit every time, we have equipped these pants with a ratchet waist closure and a silicon waistband to keep the pants from sliding down. Additionally, the lower legs are equipped with a special gator that blocks out water and mud.

Hydra Touring H2O Pants

Meet the Aero Street Jacket, designed and produced in partnership with REV’IT!. The Aero Street jacket doesn’t simply optimize airflow. Beneath purposefully placed polyester mesh panels, there’s SEESMART armor with CE-rated protection that you can rely on. Plus, plenty of practical touches for your daily trips around town like zippered pockets, a wind catcher behind the front zipper, and a jeans loop – all the season’s essentials. Winding your way to work in rush hour, you’ll appreciate the breathable mesh panels at the front, the back, and the inner arms that send a current of air around your entire body. An abrasion-resistant 600-denier polyester construction adds a sense of secure comfort, plus you can customize the fit with tabs at the waist, cuffs, and biceps.

Aero Street Jacket

Meet the Cartel Gloves, designed and produced in partnership with REV’IT!. Sporty motorsport style with premium, summer performance, these Cartel gloves are capable of optimizing airflow even in the hottest conditions while delivering superior comfort and control. Freedom of movement is afforded by strategically placed stretch, neoprene, along with the open weave structure of recycled PWR|Mesh outer shell. All these elements work symbiotically to help direct airflow to the back of the hand when it’s most needed. The strength of soft goatskin leather combined with microfiber gives the gloves maximum feel and handlebar feedback while cosseting your fingers, thumbs, and palms.

Cartel Gloves

This short sleeve is comfortable and stylish on or off the bike. Featuring the Zero Motorcycles wordmark logo on the front and our 100% Electric tagline on the back neck. Made from 50% cotton and 50% polyester.

Wordmark T-Shirt

This short sleeve is comfortable and stylish on or off the bike. Featuring the Zero SR/F graphic on the front and available in four different colors. Made from 50% cotton and 50% polyester.

Bike Graphic T-Shirt

This short sleeve is comfortable and stylish on or off the bike. Featuring Zero Motorcycles branding insignia on the front and available in four different colors. Made from 50% cotton and 50% polyester.

100% Electric T-Shirt

This short sleeve is comfortable and stylish on or off the bike. Featuring the Zero Motorcycles emblem on the front and logo on the back neck. Made from 60% ring spun cotton and 40% polyester.

Zero Motorcycles Emblem T-Shirt

This short sleeve is comfortable and stylish on or off the bike. Featuring a line art illustration of a motorcycle along with the Zero Motorcycles logo on the back neck. Made from 60% ring spun cotton and 40% polyester.

Zero Motorcycles Motorcycle T-Shirt

This short sleeve is comfortable and stylish on or off the bike. Featuring a line art illustration of a speeding lightning bolt along with the Zero Motorcycles logo on the back neck. Made from 60% ring spun cotton and 40% polyester.

0

0

Top Case

Side Cases LH & RH

SW-Motech Ion Cases

SHAD SH39 Top Case

SHAD SH36 Side Cases LH & RH

Zero Motorcycles MoJavi Saddlebags

Zero Motorcycles Possibles pouch

Zero Motorcycles Handlebar Bag

Zero Motorcycles FX Top Box Rack Kit

Top Rack Kit

SHAD SH39 Top Rack

Top Rack (FXE)

Top and Side Luggage Rack Kit

Top Box Mount Kit

Side Case Mounts

Zero Motorcycles Pronghorn Straps

Bikes

Shop + Explore

Ride Electric

0

0